Welcome To Didatec
Choose your product :

Teaching suggested applications*

-          Programming of PLC controllers

-          Programming of industrial touch screen

-          Wiring

-          Independent operation (simulation of the inputs and outputs by buttons and lights)

-          Operation as master for a real system (optional system needed)

-          Management of the safeties with the PLC controller

Description

The AUT 050 has been designed to help the student to work on automation (on-off control, proportional, PID) and touch screen programming

On the right side, it is possible to set up different types of PLC controllers (option of AUT050). The connection between the PLC controller and the AUT050 is done with quick connectors. The benefit of this unit is that you can use various types of PLC controller with only one workbench for the simulation.

The pushbuttons, the switches, the potentiometers and the lights set up on the synoptic are linked to the test sockets on the panel. The student can make their own wiring to the PLC controller inputs and outputs.

The touchscreen is linked to the PLC controller with an RJ45 cable (Protocol MODBUS – serial / RTU). There is one USB port for the touch screen and one USB port the controller on the front panel.

All the inputs and outputs of the controller are linked to test sockets on the panel. Those sockets can be wired to :

-          The pushbuttons, the switches, the potentiometers and the lights set up on the synoptic

-          Actuators and sensors of operative systems from DIDATEC Brand.

-          The simulation system SIM010 (DIDATEC brand).

The electrical supply of the elements is made with a 24VDC power supply connected to test socket on the panel (protected by a fuse).

The robust design of this device makes it suitable for use in schools.
The equipment is set up on an Anodized aluminium frame on casters wheels. This gives it great strength and a flexibility of integration into your premises. The manufacture of this equipment complies with the European standard for machinery manufacturing.
This equipment can be used alone or with other compatible equipment from our range (see last section of this document).

1.   Frame made of aluminium profile. Side panels made of aluminium and PVC. The front panel is covered with an engraved plate with all the labels.

2.   PLC controller area. The PLC controller can be easily changed by removing the front panel and disconnecting the electrical connector. (standard : PLC controller  M221 Ethernet schneider included – 8 inputs on-off / 8 outputs on-off, 4 analogical input 0-10V/ 4-20mA / T°, 2 analogical outputs 0-10V / 4-20mA) –USB connector for programming

3.   Main switch, power on button, starting switch with key and emergency stop button.

4.   2 pushbuttons with NO + NC, 1 switch 2 positions with NO+NC, 1 potentiometer for the signal 0-10V, 4 lights 24V

5.   Test sockets for the wiring of buttons, lights…

6.   Test sockets connected to the inputs and outputs of the PLC controller (ON-OFF and analogical)

7.   Test sockets connected to the power supply 24Vdc (0V/ 24Vdc)

7.5" color touch screen. Programming and data export through the USB port on the front panel.

• Electrical supply : 230 Vac – 50 Hz – 6 A
• Electrical network : 1 phase(s) + Neutral + Earth.