Teaching suggested applications*
- Studying and handling the various sensors commonly used in industry. - Introduction to the object detection technologies most commonly used on industrial production lines (diffuse optical, retro-reflective optical, inductive, capacitive, reed switches, incremental encoders, etc.). - Study of various sensor technologies:
- Assessing compatibility between the detection technology and the material to be detected.
- Determination and quantification of sensor hysteresis effects
- Determining a sensor's detection zone.
- Differences between discrete (on/off) and continuous (analogue) sensing.
- Configuring a display to suit the sensor signal characteristics (setting the scale using a voltmeter and physical measurements, calculating the slope coefficient, etc.).
- Installing and adjusting sensors on different mounting supports. - Training for personnel from machine operators to maintenance technicians.
|
Description
The BEC100 is a trainingrig for studying and using industrial sensors, position detectors and a digital display. Its robust construction, ergonomic design (no sensors protrude beyondthe frame) andcarrying handlesmake it easy to move byhand without risk of damage. It is equipped withall necessary safetysystems. It enables the study and implementation of:
- the compatibility of a wide range of sensor technologies withdifferent materials (materialtype, density, colour, transparency, etc.), to select the most suitable sensor for a given application.
- Programming of an industrialdisplay according to the type of signal provided by the sensor.
This rig also enables accurate measurements to the nearest 0.1 mm of:
Hysteresis effects and continuous position measurements using an encoder.
|
TECHNICAL DETAILS
1. Robust anodised aluminium frame on 4 vibration-damping feet, protecting the system during frequent movement. Carrying handles on the sides.
2. Enclosure serving as the machine control panel, fitted with a 24 Vdc power supply.
3. Status indicators for the encoder's 2 channels A and B, with shrouded safety sockets providing access to the corresponding electrical signals for voltmeter measurements.
4. Status indicators for the various sensors and a main on/off switch.
5. Polarised retro-reflective optical sensor with honeycomb reflector.
6. Carriage handwheel for precise adjustment of travel.
7. Carriage mounted on linear ball-bearing guides, with 1 front holder and 1 side holder for plates of different materials. A leadscrew and handwheel provide precise linear movement.
8. Incremental encoder with a resolution of 1 pulse per degree, mounted on the carriage drive screw shaft.
9. Set of capacitive, reed switch (cylinder-mounted), diffuse-reflective optical and inductive sensors.
10. Digital display of the position measured by the incremental encoder, with reset button.
11. Removable double-acting cylinder with reed switch sensor. The rod attaches to the moving carriage for precise displacement (determination of magnetic sensor characteristics).
12. Set of 6 plates for detector characterization:
Steel
White pvc
Aluminium
Polycarbonate
Reflective material Plate with different aperture diameters for the light beams.
|
INSTALLATION REQUIREMENTS
- Power supply: 230 Vac – 50 Hz – 2 A
- Electrical supply type: 1 phase + Neutral + Earth.
- Dimensions (L × W × H, mm): 870 x 480 x 430
- Weight (kg): 35
|
|
Documentation :
Download PDF Doc :
I am interested
Add...This product to my selection :
 |