The bench is installed on an aluminum profile structure equipped with four directional braked casters. It has an electrical box with a main power disconnect switch and a 30mA differential circuit breaker. 1. Glass test cylinder V = 1.7 L 2. Heating resistors P = 900 W with low level detection sensor (safety) 3.adjustment of the heating power of the resistors by potentiometer 4.water flow meters with needle adjustment valve for the flow to the exchangers Scales: 0.2 to 1.5 L / min (gold); 0.3 to 3.0 L / min (copper) 5. Two condensers Material of 1st copper condenser: film Material of 2nd gold-plated condenser: Drops
|
6. Liquid / vapor separator 7.vapor cooling coil (ambient air) 8.Digital pressure sensor with display on the touch screen 9. Test cylinder safety valve and safety pressure switch 10.Electric vacuum pump 11. Empty break valve Integrated instrumentation: -pressure sensor: -1 to 10bars -water flowmeter (gold): 0.2 to 1.5 L / min -water flowmeter (copper): 0.3 to 3.0 L / min -t thermocouple temperature probes (X7): -20 to + 100 ° C - Pt100 temperature probes (X4): -20 to + 100 ° C -wattmeter heating resistance power: 0 to 1150W The temperature and power measurements are displayed on a 7 "touch screen: |